Keywords = EDM
Number of Articles: 22

1

Application of ANFIS for Prediction Micro Holes in EDM

ALNAHRAIN JOURNAL FOR ENGINEERING SCIENCES
Volume 20, Issue 3, Summer 2017, Page 544-549
Shukry H. Aghdeab; Raed R. Shwaish

2

EFFECT OF CURRENT AND ELECTRODE MATERIAL ON MATERIAL REMOVAL RATE (MRR) AND SURFACE ROUGHNESS (RA) IN EDM PROCESS

AL-TAQANI
Volume 30, Issue 1, Winter 2017, Page 0-0
Baqer Ayad Ahmed; Ahmed Basil Abdul wahhab

3

Effect of Current on Average Surface Roughness of Borosilicate Glass at EDM Machining and Comparison with Numerical Programs

Engineering and Technology Journal
Volume 27, Issue 6, Spring 2009, Page 1026-1038
Wathik I. Mahdi; Maan A. Tawfiq; Shukry H. Aghdeab

4

Effect of Powder Concentration in PMEDM on Machining Performance for Different Die steel Types

Engineering and Technology Journal
Volume 33, Issue 9, Autumn 2015, Page 2174-2186
Maan Aabid Tawfiq; Azzam Sabah Hameed

5

Effect of SiC-Cu Electrode on Material Removal Rate, Tool Wear and Surface Roughness in EDM Process

Engineering and Technology Journal
Volume 38, Issue 9, Summer 2020, Page 1406-1413
Yousif Q. Laibi; Saad K. Shather

6

Enhancement of EDM Performance by Using Copper-Silver Composite Electrode

Engineering and Technology Journal
Volume 38, Issue 9, Summer 2020, Page 1352-1358
Saad K. Shather; Abbas F. Ibrahim; Zainab H. Mohsein; Omar H. Hassoon

7

Experimental Investigations of Hole - EDM to Optimize Electrode Wear through Full Factorial of Design of Experiment

Engineering and Technology Journal
Volume 31, Issue 13, Summer 2013, Page 2572-2579
Shukry H. Aghdeab; Laith A. Mohammed

8

Experimental Investigations of Hole - EDM to Optimize ElectrodeWear through Full Factorial of Design of Experiment

Engineering and Technology Journal
Volume 33, Issue 2, Winter 2015, Page 372-379
Shukry H. Aghdeab; Laith A. Mohammed

9

Improving the Metal Removal Rate (MRR) in Electro Discharge Machining by Additives Powder

Engineering and Technology Journal
Volume 34, Issue 14, Autumn 2016, Page 2766-2774
Saad Kariem Shather; Ruaa Amer salim

10

Influence of EDM Parameters on the Appearance of Recast Layer

Engineering and Technology Journal
Volume 35, Issue 7, Summer 2017, Page 694-700
S.K. Shather; A.F. Ibrahim; N. Jammal

11

Influence of Polarity of Electro Discharge Machine (EDM) on Surface Roughness (SR) and Metal Removal Rate (MRR) of Low Carbon Steel

Engineering and Technology Journal
Volume 38, Issue 7, Summer 2020, Page 975-983
Shahd Taqi; Saad K. Shather

12

Investigation the Effect of Negative Polarity of Surface Roughness and Metal Removal Rate During EDM Process

Engineering and Technology Journal
Volume 38, Issue 12, Autumn 2020, Page 1852-1861
Shahd A. Taqi; Saad K. Shather

13

Optimization of MRR and Surface Roughness for 7024 AL-alloy in EDM Process

Engineering and Technology Journal
Volume 35, Issue 5, Summer 2017, Page 546-553
M.M. Abdulrazaq; S.K. Ghazi

14

Optimizing Overcut Parameter of Micro-Holes Machining by EDM Using Taguchi Method

Engineering and Technology Journal
Volume 32, Issue 2, Winter 2014, Page 298-304
Laith A. Mohammed; Shukry H. Aghdeab

15

Prediction of Surface Roughness and Material Removal Rate for 7024 AL-Alloy in EDM Process

Engineering and Technology Journal
Volume 34, Issue 15, Autumn 2016, Page 2796-2804
Abbas Fadhil Ibrahim; Mostafa Adel Abdullah; Safaa Kadhim Ghazi

16

PREDICTION OF SURFACE ROUGHNESS, MATERIAL REMOVAL RATE AND TOOL WEAR RATIO MODELS FOR SIC POWDER MIXING EDM

Journal of Engineering and Sustainable Development
Volume 19, Issue 5, Autumn 2015, Page 73-93
Ahmed Naif Ibrahim; Samir Ali Amin; Saad Mahmood Ali

17

Studying and Modeling the Effect of Graphite Powder Mixing Electrical Discharge Machining on the Main Process Characteristics

Al-Khwarizmi Engineering Journal
Volume 11, Issue 3, Summer 2015, Page 20-36
Ahmed N. Al-Khazraji; Samir A. Amin; Saad M. Ali

18

Studying the Affect of Current on (MRR) and (EW) in Electrical Discharge Machining (EDM)

Engineering and Technology Journal
Volume 31, Issue 17, Autumn 2013, Page 3298-3311
Ahmed Bassil Abdulwahhab; Shukry Hamm; Maan Aabid Tawfiq

19

Studying the Parameters of EDM Based Micro- Cutting Holes Using ANOVA

Engineering and Technology Journal
Volume 31, Issue 15, Summer 2013, Page 2876-2884
Shukry H. Aghdeab; Laith A. Mohammed

20

Study the Effect of Electrical Current on Average Surface Roughness of Borosilicate Glass at EDM Machining and Comparison Using Matlab Program

Engineering and Technology Journal
Volume 29, Issue 6, Spring 2011, Page 1157-1165
Shukry H. Aghdeab; Ahmed A. Abulwahhab

21

Study the Effect of the Graphite Powder Mixing Electrical Discharge Machining on Creation of Surface Residual Stresses for AISI D2 Die Steel Using Design of Experiments

Engineering and Technology Journal
Volume 33, Issue 6, Summer 2015, Page 1399-1415
Ahmed Naif Al-Khazraji; Samir Ali Amin; Saad Mahmood Ali

22

The Influence of Current & Pulse off Time on Material Removal Rate and Electrode Wear Ratio of Steel 304 in EDM

Engineering and Technology Journal
Volume 33, Issue 8, Autumn 2015, Page 1845-1856
Shukry Hammed Aghdeab; Vian Nihad Najm