1.

Characterization of Laser-Ablated Nanostructured Al2O3/p-Si Solar Cells

Volume 11, Issue 1, March 2015, Pages 29-32
Wafaa K. Khalef; Sarya D.M. Al-Algawi; Selma M. Al-Jawad
2.

Comprehensive Electrochemical Evaluation of Protective Coatings Properties by Sol-Gel Route for Stainless Steel Corrosion

Volume 31, 4A, April 2013, Pages 71-86
Mohammed Hussein J. Al Atia
3.

Corrosion Mechanism of Refractory Bricks Lining the Cement Kiln

Volume 9, Issue 2, August 2009, Pages 213-222
Faiz A.Shukur; Montadher A.Muhammed; Ali Abdul-Hussain A.Amir
4.

Developing the Alumina Hybrid Sol-Gel Coating for Steel Oxidation Protection at High Temperatures

Volume 32, 4B, April 2014, Pages 744-758
Mohammed Hussein J. Al Atia
5.

EFFECT OF ALUMINA POWDER ADDITION ON WEAR RESISTANCE OF Zn-4Al ALLOY PREPARED BY POWDER METALLUGY METHOD

Volume 8, Issue 3, September 2015, Pages 20-33
Ali Mezher Resen
6.

Effect of Fillers on the Adhesion Properties of the Cured Unsaturated Polyester Adhesive

Volume 27, Issue 1, March 2018, Pages 65-72
Adil K. Hussien; ad F. Mahmood
7.

Effect of Nano Silica Nano Alumina and Short Carbon Fiber Addition on Mechanical and Physical Properties of Blend Epoxy – Polyester

Volume 14, Issue 4, December 2019, Pages 131-149
Husnyia H. Thanon Albyate; Ayad Awad Mohammed Al jaboury
8.

Effect of Thermally Sprayed Ceramic Coating on Properties of Low Alloy Steel

Volume 32, Issue 10, October 2014, Pages 2568-2575
Fadhil A. Chyad; Abdalkalaq F. Hamood; Lamees S. Faiq
9.

Experimental and Numerical Analysis of Bulletproof Armor Made from Polymer Composite Materials

Volume 33, 7A, July 2015, Pages 1583-1597
Jawad Kadhim Oleiwi; Abass Khammas Hussein; Sura Hameed Ahmed
10.

Experimental Investigation of the Influence of Adding Alumina to Diesel Fuel on the Engine Performance and Emission Characteristics

Volume 38, 4A, April 2020, Pages 523-529
Sadiq T. Bunyan; Abed AL-Khadim M. Hassan
11.

Experimental Stability and Thermal Characteristics Enhancement Analysis of Water Based Boehmite Nano fluid

Volume 33, 7B, August 2015, Pages 1193-1210
Mohammed Hussein J. Al –Atia; Sarah A. Abed
12.

EXTRACTION OF ALUMINA FROM IRAQI COLORED KAOLIN BY LIME-SINTER PROCESS

Volume 10, Issue 3, December 2014, Pages 109-117
Abdul Wahab A. Al-Ajeel; Suhair Z. Abdullah; Wasan A. Muslim; Malath Q. Abdulkhader; Mohammed K. Al-Halbosy; Falah A. Al-Jumely
13.

IMPROVEMENT OF WORKABILITY OF PORCELAIN UNDER EFFECT OF ALUMINA

Volume 5, Issue 2, December 2012, Pages 129-136
Jaleel I.k.Al.Robayie
14.

Influence of Power Density and Exposure Time on Laser Drilling Hole

Volume 32, Issue 9, September 2014, Pages 2313-2321
Saad Kariem Shather; Mohammed Sattar Jabbar
15.

INVESTIGATION ON THE EFFECT OF THE POLYETHYLENE GLYCOL ON THE ELECTROPHORTIC DEPOSITION OF ALUMINA AND ZIRCONIA

Volume 11, Issue 1, March 2018, Pages 1-9
Awham Jumah Salman; Saad Badry Hasson Farid; Alaa Abdul hasan Atiyah
16.

Mechanical Strength of Alumina Compacts Lubricated withPoly (methacrylic acid esters) Copolymers

Volume 8, Issue 11, April 2010, Pages 48-52
Inaam M. Abdulmajeed; Hadi S. Al-Lami
17.

Microstructure and Some Properties of Aluminum-Silicon Matrix Composites Reinforced by Alumina or Chromia

Volume 6, Issue 1, March 2010, Pages 57-68
Ahmed A. Moosa
18.

NUMERICAL AND EXPERIMENTAL STUDY OF BENDING AND TENSILE BEHAVIOR FOR THEALUMINUM –SILICON COMPOSITE BEAM REINFORCED BY ALUMINA

Volume 12, Issue 3, September 2012, Pages 508-520
Mohamad K. Alwan
19.

Parametric Study of the Effect of the Suspension Composition on the Electrophoretic Deposition of Alumina

Volume 26, Issue 2, June 2018, Pages 62-68
Alaa Abdul hasan Atiyah; Saad Badry Hasson Farid; Awham Jumah Salman
20.

Preparation of Nano Activated γ-Alumina ( ) with Surfactant and Surface Characterization

Volume 24, Issue 3, April 2016, Pages 658-665
Enas Sameer AL-Khawaja; Alaa Hussein Al-Fatlawi
21.

Production of High Alumina Fire Brick from Iraqi Clay

Volume 4, Issue 1, June 2012, Pages 63-74
Qasid Abdul Sattar
22.

Recovery of vanadium element from wastewater of petroleum refineries using effective adsorbent: Mathematical approach via isothermal, kinetics and thermodynamic simulation

Articles in Press, Accepted Manuscript , Available Online from 29 January 2024
Zainab Jabbar Shadhan; Salem Alhamd; Mohammed Nsaif Abbas
23.

Structural Characteristics of γ-Al2O3 Nanoparticles Prepared by Laser-Assisted Spray Pyrolysis Technique

Volume 11, Issue 2, June 2015, Pages 29-32
Bahaa T. Chiad; Zainab S. Sadiq; Dunia K. Mahdi; Fatin H. Mohammed
24.

Studying the Physical Properties of Ceramic Bodies Prepared by Slip Casting Technique

Volume 10, Issue 4, December 2014, Pages 25-39
Sabah A. Salman; Sheahab A. Z. Al-jubouri; Haydar Ali Salman Al-obaidy
25.

Study of alumina prepared from Iraqi kaolin

Volume 15, Issue 34, September 2017, Pages 148-152
Dhuha M. Oudah Al-Sumaidaie; Jassim M. Salih; Ayoub S. Karim
First Page Previous Page 1 2 Next Page Last Page


Journal Management System. Powered by ejournalplus.com