1.

An Evaluation of the Effect of Bleaching Agent on Microhardness of a New Silorane-Based Restorative System and Methacrylate-Based Restorative Material

Volume 20, Issue 1, February 2012, Pages 385-363
Shatha Abdul Kareem; Rasha Hameid Jehad
2.

Assessment of diametral tensile strength and microhardness of Glass ionomer reinforced by different amounts of Hydroxyapatite

Volume 18, Issue 3, December 2006, Pages 17-20
Mohammed Rasheed; Raghad A. Mohammed
3.

A STUDY FOR SOME OF MECHANICAL PROPERTIES OF AL2O3 CERAMIC THIN FILM PREPARED BY SPRAY PYROLYSIS METHOD

Volume 10, Issue 2, August 2010, Pages 290-303
Dr.Alaa A. Abdul-Hamead; Dr.Mohammd s.h
4.

Biomimetic Enamel Remineralization: A Comparative in vitro Study of Self-Assembling Peptide, Fluoride Varnish, and their Combination at Different Times by Surface Microhardness Test

Volume 22, Issue 2, September 2022, Pages 245-254
Ahmed Al-baso; Raya Al-Naimi
5.

Characterization of Nb2O5-Ni Coating Prepared by DC Sputtering

Volume 39, 4A, April 2021, Pages 565-572
Hiyam M. Jedy; Rana A. Anaee; Abdullah A. Abdulkarim
6.

Corrosion Behavior of Friction Stir Process for Al-base Nano Composite Surface Produced by Electrophoretic Deposition

Volume 33, 7B, August 2015, Pages 1290-1302
Hussein A. Hussein
7.

Effectiveness of Four Different Light-activated Composites Cure with Different Light Energy Densities

Volume 3, Issue 3, September 2006, Pages 224-229
Dr. Ali A. Al- Shekhli B.D.S; M.Sc; Ph.D
8.

Effect of CO2 Laser Fluence in Cladding Process on the Microstructure of Cold Rolled 0.2 % Carbon Steel

Volume 39, Issue 7, July 2021, Pages 1052-1059
Suhair A. Hussein; Mohammed Kadhim; Mahdi M. Hanon
9.

Effect of ECAP process on mechanical properties and microstructure of AA-6061 recycled chips

Volume 41, Issue 7, July 2023, Pages 924-939
Rawa H. Mohammed; Ayad F. Shahab; Alireza Rezaei
10.

Effect of Friction Stir Processing (FSP) to the Some Properties of Pure Copper Welded by Friction Stir Welding

Volume 36, 9A, September 2018, Pages 985-990
Mais A. Abdulkareem
11.

Effect of Laser Surface Treatment on Mechanical Properties of CK45 Steel

Volume 29, Issue 8, June 2011, Pages 1610-1618
Sabah N. mahmood; Khansaa Dawood Selman
12.

Effect of Laser Surface Treatment on Wear Resistance of 100Cr6 Steel

Volume 27, Issue 6, April 2009, Pages 1151-1161
Khansaa Dawood Salman
13.

Effect of Siwak Extract on the Microhardness and Microscopic Feature of Initial Caries-Like Lesion of Permanent Teeth, Compared to Fluoridated Agents

Volume 5, Issue 4, December 2008, Pages 365-372
Dr. Ahlam H. Majeed. M. Sc; Ph. D; Samarrai M. Sc; Dr. Sulafa K. EL; Dr. Nibal Mohammed AL-Obaidy M. Sc
14.

Effects of 35% Versus 10% Carbamide Peroxide At-Home Bleaching Agents with or without MI Paste Plus on Enamel Properties

Volume 5, Issue 2073, December 2017, Pages 40-48
Manal H. Abd-alla; Haider H. Jasim
15.

Enhancement of surface properties for C11000 and 6063Al alloys by using laser shock wave process

Volume 33, 7B, August 2015, Pages 1211-1219
Abdulhadi kadhim; Ayad Z.Mohammed; Haitham T.Hussein
16.

Evaluate the Performance of the System Thermal Evaporatingin Vacuum for Metal Type Varian USA

Volume 33, 3B, March 2015, Pages 76-82
Alaa A. Abdul- Hameed; Saria D. M.Al-Algawi
17.

Improvement of Erosion Resistance of Aluminum- Copper Alloy Type 2024 by Plasma Nitriding

Volume 40, Issue 12, December 2022, Pages 1695-1701
Mohammed H. Maseekh; Ali H. Ataiwi; Jamal J. Dawood
18.

Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60

Volume 36, 10A, October 2018, Pages 1039-1047
Sadeq H. Bakhy; Samir A. Amin; Fouad A. Abdullah
19.

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOMOGENIZED STIR CASTING ALUMINUM BRONZE ALLOYS

Volume 11, Issue 3, September 2018, Pages 345-356
20.

One Parameter Composite Semigroups of Linear Bounded Operators in Strong Operator Topology of Schatten Class Cp

Volume 29, Issue 8, June 2011, Pages 1463-1470
Samir Kasim Hassan; Al-Taie M; Al-Malki Anam; Al-Attar Abeer; Mustafa Khaleel Ismael; Fatema Ahmed Sadeq; Radhi A .Zboon; Jehad R.Kider; Samir K .Hassan; Hussain J. M. Alalkawi; Raad H. Majid; Rawaa A. Alomairy; Luma Abdul Ghani Zghair; Hadia Kadhim J.Al-Ogili; Assifa M. Mohamad; Abbas Sheyaa Alwan; Haider L. Aneed; Assim H Yousif; Salema Sultan Salman; Abbas Hussien Miry; Abduladhem A.Ali; Mohammed Zeki Al-Faiz; Sabah N. mahmood; Khansaa Dawood Selman; Shaymaa Tareq Kadhim
21.

Study of Hardness ,Wear and Corrosion Resistance of ZrO2 Ceramic Coats Prepared by Spray Pyrolysis Method

Volume 0, Issue 0, January 2010, Pages 787-797
Dr.Ali H.Ataiwi; Dr.Alaa A. Abdul-Hamead
22.

Study The Effect of Co Concentration In Nico Thin Films on Some Structure And Mechanical Properties

Volume 28, Issue 12, June 2010, Pages 2486-2496
Alaa A. Abdul-Hamead
23.

Surface Modification of Red Brass Alloy by Using Laser Technique

Volume 34, 7A, July 2016, Pages 1439-1444
Abdulhadi Kadhim; Inmar N.Ghazi; Amjed Razzaq.Hussein
24.

Synthesis and Studying SomeMechanical Properties of Nanocomposite

Volume 31, 7A, June 2013, Pages 1221-1228
Fadhil A. Chyad; Abdul-Raheem K.Abid Ali; Auday A. Mehatlaf
25.

Synthesis of B4C/YTZP Composite Powder and Studying Effect of its Addition on Mechanical Properties of B4C

Volume 32, Issue 5, June 2014, Pages 1158-1170
Fadhil A. Chyad; Mohammed H. AL-Taie; Hussein AlaaJaber
First Page Previous Page 1 2 Next Page Last Page


Journal Management System. Powered by ejournalplus.com